User
Guide
|
1. Install
the Firmware Live Update Tool under your windows. When the screen
appeared, click "Next".
|
|
2. Read
the license agreement and click "YES" button
if you agreed the license content.
|
|
3. Type
the "User Name" & "Company Name" then click "Next" button.
|
|
4. Click "Finish" button
to complete the Live
Update Setup process.
|
|
5.Click "LiveUpdate" icon
on Desktop to execute program.
|
|
6. Click "LiveUpdate"=>"Setting" to
set the configuration.
|
|
7. Please
select a upgrade frequency once a week ..etc. The LiveUpdate is
going to check the firmware automatically by the period time depend
on the setting.
|
|
8. Click
the "User Information" to
fill the form out, the Name and Email columns are necessary.
We do not send any email to the customer's email address for any advertisement.
|
|
9. Click "Check
updates" button to
look for the latest firmware version.
|
|
10. Click
the check box in front of model name then click "Update
selected device" button the new firmware will
be downloaded if the Latest version newer than Drive version.
|
|
11. During
firmware updating, please do not execute any application to avoid
flash failure happen.
|
|
12. The "Windows
Flash Program" has been activated, click "Upgrade" button to
flash the firmware.
|
|
13. Please
pay attention to read the "Warning massage" in advance and click "OK" button
after reading all the content.
|
|
14. The
drive is upgrading firmware.
|
|
15. Congratulation!
The f/w has been upgraded successfully by the “LiveUpdate” program. Click "Close" button
then reboot the system. The drive with new firmware is working now.
|
Flash
Failure Recovery
If
the flash failure happen the drive will not be recognized by
Windows so it should flash the firmware on DOS mode to recover
the drive.Please
download the correct model firmware of dos version.
DRW1004IM
Firmware DOS Version Dv48csE3DE.zip
DRW1008IM
Firmware DOS Version H8x_v55(csD098).zip.
DRW1108IM
Firmware DOS Version B014(CSBA83).zip.
Please
refer the log file before download the firmware of DOS version
 .
Flash
Steps on DOS
1.Build
a boot disk (floppy) on Windows 98.
2.Unzip
the firmware to hard disk. (If
it's NTFS file system please download NTFSDOS.ZIP then executes
at DOS first).
3.Boot to
DOS mode and change to the firmware disc.
4. If connect the drive
to Secondary IDE Channel / Master, please type A:>F 3.
5.
If connect the drive to Secondary IDE Channel / Slave,
please type A:>F 4.
6.When it flashes
to 100%, then finish and restart computer. 7.If
it's not the newest firmware please upgrade by LiveUpdate
again.
* Warning!
Flash program can't use on DOS mode of Windows!
* Warning! After
recover please go to upgrade to the newest firmware
by LiveUpdate.
Got
Question
1.Sometimes,
after flash firmware the drives will be disabled as above.
Ans: Please delete the drives then reboot the system, the drives will
work fine with new firmware. |
